DR410i
Minimal, strong and mechanically progressed, Fortuna DR410i is intended to convey unrivaled usefulness and profit from speculation for 152-251 mm (6-97/8 in) revolving and DTH openings, with a standard pole offering a first pass ability of 10 m or 33 ft and a maximum profundity of 46.6 m or 153 ft. The drawn out pole choice conveys a first pass profundity of 14 m or 46 ft with an absolute profundity limit of 32.3 m or 106 ft across totally suggested pipe widths.
Fortuna DR410i is AutoMine® prepared giving usefulness to both ready and off-board mechanized needs. This versatile arrangement, from on-board robotization that increments penetrating effectiveness to full independent activity, is intended to address client issues both now and later on
Benefits
- Fortuna Intelligent Control System Architecture (SICA) gives the administrator ongoing criticism in regards to the machine's presentation and wellbeing, alongside apparatuses for drill arranging, announcing and investigation, further developing accessibility and usefulness
- Locally available mechanized highlights, for example, Auto Drill and Auto Cycle guarantee consistency opening to-opening while Auto Mast and Auto Level capacities guarantee reliable activities and diminish wear on primary weldments
- Broadened pole option delivers a first pass choice of 14 meters or 46ft with an all out profundity limit of 32.3m or 106 ft disposing of the need to add pipe, further developing efficiency and diminishing expense
- Protected deck wrench permits cycle change related to discretionary controller crane dispenses with manual digit taking care of upgrading administrator security
- Devoted stepping stool gives simple admittance to pole parts for examination and upkeep. Wellbeing is improved with the expansion of Fiberglass Reinforced Plastic grinding pole infill and ensured tie-off focuses tending to working at statures concerns
- Taxi offers great ergonomics with contact screens and keypads mounted to the turn empowered administrators' seat, raised situating offers a full unhindered perspective on the drill table through the extra-huge drillers window
Technical data | |
---|---|
Engine power | 562 kW (755hp) |
Max hole depth (Std. Mast) | Up to 46.6m (153 ft) |
Max hole depth (Ext. Mast) | Up to 32.3m (106 ft) |
Dimension mast up (Std. Mast) (L-W-H) | 11.25 m x 5.74 m x 16.61 m (36 ft 11 in x 18 ft 10 in x 54 ft 6 in) |
Dimension mast down (Std. Mast) (L-W-H) | 16.81 m x 5.74 m x 7.36 m (55 ft 2 in x 18 ft 10 in x 24 ft 2 in) |
Dimension mast up (Ext. Mast) (L-W-H) | 11.25 m x 5.74 m x 20.62 m (36 ft 11 in x 18 ft 10 in x 67 ft 8 in) |
Dimension mast down (Ext. Mast) (L-W-H) | 20.82 m x 5.74 m x 7.36 m (68 ft 4 in x 18 ft 10 in x 24 ft 2 in) |
Hole diameter | 152 - 251 mm (6.0 - 9 ⅞ in) |
Operating weight range | 63,503-70,307 kg (140,000-155,000 lb) |
Rotary head | 130 rpm / 8,340 Nm / 6,150 ft lb |
First pass depth (Std. Mast) | 10 m (33 ft) |
First pass depth (Ext. Mast) | 14 m (46 ft) |
Compressor Standard low pressure | 45.3 m3/min 1,600 SCFM @ 6.9 bar 100 psi |
Compressor Standard high pressure | 41 m3/min 1,450 SCFM @ 24.1 bar 350 psi |
Weight on Bit | 258 kN (58,000 lb) |
Max. Pull Down Force | 222.4 kN (50,000 lb) |
Drilling technique | Rotary / DTH |
*Consult factory for options and alternate power group arrangements
*Consult factory for options and alternate power group arrangements
*Consult factory for options and alternate power group arrangements